苹果版时时红包

Your current location : Home >> Products >> Petroleum Drilling and Production Series
  • Offshore oil platform-soil powder pipeline at filling station, oil pipeline, water pipeline, foldable pipeline

    Drilling platform ash conveying pipeline

    Abrasive powder for oil / powder supply system of offshore drilling platform filling station replenishment system, seawater drainage hose assembly and other pipelines used for jackup and semi-submersible drilling platforms, filling station replenishment system of drilling ships Material conveying hoses and other wear-resistant hose assemblies for industrial abrasive powder conveying applications, the hose body and hose joints must have a strong anti-pullout and sealing function, and the hose body must carry a variety of External forces, such as powder transportation, external wind and waves, etc. The hoses produced in the prior art have a large deformation rate (elongation, expansion) under working pressure and external pressure, and the hoses are in the process of powder transportation. The walls cause friction and collision, which is easy to generate static electricity and explode. The powder conveying hose assembly for the replenishment system of the offshore drilling platform filling station, including the hose and the joint connected to the hose. The hose includes the inner film, the skeleton material layer, and the outer rubber layer in order from the inside to the outside. The joint includes an inner core sleeve and a compression sleeve. The hose is inserted into the gap formed by the inner core sleeve and the compression sleeve. The hose is squeezed and compressed by squeezing the compression sleeve to prevent the connector from being pulled out. Function and form a sealing effect on the inner rubber. 1. The inner film uses butadiene rubber and natural rubber as the main materials, and sulfur and sulfenamide accelerators are added. Medium and ultra wear-resistant carbon black and high wear-resistant carbon black are used as reinforcement and conductive materials. 2. The skeleton material layer is Several layers of nylon cord or polyester cord. 3. The outer film uses CR neoprene and NR natural rubber as the main material, and medium super wear-resistant carbon black and high wear-resistant carbon black are added as reinforcing and conductive materials. 4. The inner rubber layer of the hose uses BR butadiene rubber and NR natural rubber as the main material, which is abrasion-resistant, aging-resistant, and conductive; the skeleton layer uses a tape layer with a small amount of deformation, while using a balance of 30 °-60 ° Angular winding, more preferably 54 ° 44 ', improve the situation of large deformation (elongation, expansion) under the working pressure of the hose; the outer film uses CR neoprene and NR natural rubber as the main material, and the outer rubber formula is conductive Performance, it is easy to generate static electricity when the powder is transported. The conductive function of the rubber material of the hose is easy to conduct static electricity to the metal joint on the end. The metal joint is connected to the equipment to conduct the static electricity. The surface resistance of the tube cannot exceed lO5Q / m, which meets the requirements of DNVNo. 9TAP5-791-70. The grounding resistance of each point of the hose cannot exceed 106Q, which meets the requirements of DNVNo. 9TAP5-791-70.

  • Offshore oil port and starboard filling station-supply pipeline

    Drilling Platform-Supply Line

    Abrasive powder for oil / powder supply system of offshore drilling platform filling station replenishment system, seawater drainage hose assembly and other pipelines used for jackup and semi-submersible drilling platforms, filling station replenishment system of drilling ships Material conveying hose and its wear-resistant hose assembly for industrial abrasive powder conveying, the hose body and hose joint need to have a strong anti-pullout and sealing function, and the hose body must carry various External forces, such as powder transportation, external wind and waves, etc. The hoses produced in the prior art have a large deformation rate (elongation, expansion) under working pressure and external pressure, and the hoses are in the process of powder transportation. The walls cause friction and collision, which is easy to generate static electricity and explode. The powder conveying hose assembly for the replenishment system of the offshore drilling platform filling station, including the hose and the joint connected to the hose. The hose includes the inner film, the skeleton material layer, and the outer rubber layer in order from the inside to the outside. The joint includes an inner core sleeve and a compression sleeve. The hose is inserted into the gap formed by the inner core sleeve and the compression sleeve. The hose is squeezed and compressed by squeezing the compression sleeve to prevent the connector from being pulled out. Function and form a sealing effect on the inner rubber. 1. The inner film uses butadiene rubber and natural rubber as the main materials, and sulfur and sulfenamide accelerators are added. Medium and ultra wear-resistant carbon black and high wear-resistant carbon black are used as reinforcement and conductive materials. 2. The skeleton material layer is Several layers of nylon cord or polyester cord. 3. The outer film uses CR neoprene and NR natural rubber as the main material, and medium super wear-resistant carbon black and high wear-resistant carbon black are added as reinforcing and conductive materials. 4. The inner rubber layer of the hose uses BR butadiene rubber and NR natural rubber as the main material, which is abrasion-resistant, aging-resistant, and conductive; the skeleton layer uses a tape layer with a small amount of deformation, while using a balance of 30 °-60 ° Angular winding, more preferably 54 ° 44 ', improve the situation of large deformation (elongation, expansion) under the working pressure of the hose; the outer film uses CR neoprene and NR natural rubber as the main material, and the outer rubber formula is conductive Performance, it is easy to generate static electricity when the powder is transported. The conductive function of the rubber material of the hose is easy to conduct static electricity to the metal joint on the end. The metal joint is connected to the equipment to conduct the static electricity. The surface resistance of the tube cannot exceed lO5Q / m, which meets the requirements of DNVNo. 9TAP5-791-70. The grounding resistance of each point of the hose cannot exceed 106Q, which meets the requirements of DNVNo. 9TAP5-791-70.

  • Platform port and starboard filling stations, supply stations, supply lines

    Drilling platform-high pressure ash pipeline

    Abrasive powder for oil / powder supply system of offshore drilling platform filling station replenishment system, seawater drainage hose assembly and other pipelines used for jackup and semi-submersible drilling platforms, filling station replenishment system of drilling ships Material conveying hoses and other wear-resistant hose assemblies for industrial abrasive powder conveying applications, the hose body and hose joints must have a strong anti-pullout and sealing function, and the hose body must carry a variety of External forces, such as powder transportation, external wind and waves, etc. The hoses produced in the prior art have a large deformation rate (elongation, expansion) under working pressure and external pressure, and the hoses are in the process of powder transportation. The walls cause friction and collision, which is easy to generate static electricity and explode. The powder conveying hose assembly for the replenishment system of the offshore drilling platform filling station, including the hose and the joint connected to the hose. The hose includes the inner film, the skeleton material layer, and the outer rubber layer in order from the inside to the outside. The joint includes an inner core sleeve and a compression sleeve. The hose is inserted into the gap formed by the inner core sleeve and the compression sleeve. The hose is squeezed and compressed by squeezing the compression sleeve to prevent the connector from being pulled out. Function and form a sealing effect on the inner rubber. 1. The inner film uses butadiene rubber and natural rubber as the main materials, and sulfur and sulfenamide accelerators are added. Medium and ultra wear-resistant carbon black and high wear-resistant carbon black are used as reinforcement and conductive materials. 2. The skeleton material layer is Several layers of nylon cord or polyester cord. 3. The outer film uses CR neoprene and NR natural rubber as the main material, and medium super wear-resistant carbon black and high wear-resistant carbon black are added as reinforcing and conductive materials. 4. The inner rubber layer of the hose uses BR butadiene rubber and NR natural rubber as the main material, which is abrasion-resistant, aging-resistant, and conductive; the skeleton layer uses a tape layer with a small amount of deformation, while using a balance of 30 °-60 ° Angular winding, more preferably 54 ° 44 ', improve the situation of large deformation (elongation, expansion) under the working pressure of the hose; the outer film uses CR neoprene and NR natural rubber as the main material, and the outer rubber formula is conductive Performance, it is easy to generate static electricity when the powder is transported. The conductive function of the rubber material of the hose is easy to conduct static electricity to the metal joint on the end. The metal joint is connected to the equipment to conduct the static electricity. The surface resistance of the tube cannot exceed lO5Q / m, which meets the requirements of DNVNo. 9TAP5-791-70. The grounding resistance of each point of the hose cannot exceed 106Q, which meets the requirements of DNVNo. 9TAP5-791-70.

  • For conveying granules or powders such as silt, sand, silica, or other abrasive materials.

    Drilling Platform-Abrasion Resistant Ash Pipe Mortar Pipe

    Structure: black smooth antistatic wear-resistant synthetic rubber inner layer, multiple layers of wear-resistant adhesive tape reinforcement layer, wear-resistant outer rubber layer. Features: Hose has small inner and outer diameter tolerances, high abrasion resistance and weather resistance. The product is made of antistatic rubber, which can completely take out static electricity. Uses: for conveying granules or powders, such as silt, sand, silica, or other abrasive materials. Temperature range: -40 ℃ -120 ℃ 1. Wear-resistant conveyor hose Structure: black smooth antistatic wear-resistant synthetic rubber inner layer, multiple layers of wear-resistant adhesive tape reinforcement layer, wear-resistant outer rubber layer. Features: Hose has small inner and outer diameter tolerances, high abrasion resistance, weather resistance and other properties; The product is made of antistatic rubber, which can completely take out static electricity. Uses: used to convey particles or powder, such as grain, sand, sand, etc. Silica sand or other abrasive materials. Temperature range: -40 ℃ -120 2. Abrasion-resistant suction and discharge hose structure: black smooth antistatic abrasion-resistant synthetic rubber inner layer, multi-layer abrasion-resistant adhesive tape reinforcement layer, single or double-layer metal spiral wire, abrasion-resistant outer rubber layer . Features: The hose has small internal and external tolerances, high wear resistance, negative pressure resistance, weather resistance and other properties; the product has a good degree of adhesion and is not easy to delaminate. Uses: Used to suck and transport abrasive food or mud materials such as cement, sand, gravel, particles, etc. by means of air extraction or gravity. Temperature range: -40 ° C to 120 ° C. Bending radius Mm Inch Mm Inch Bar Bar Kg / mm mm 51 2 65 2-17 / 32 10-40 0.1-20 1.99 20 459 63.5 2-1 / 2 78 3-1 / 8 10-40 0.1-20 2.37 20 567 76 3 91 3-17 / 32 10-40 0.1-20 3.06 20 684 102 4 118 4-23 / 32 10-40 0.1-20 3.95 20 918 108 4-1 / 4 120 4-7 / 10 10-40 0.1 -20 4.28 20 990 115 4-1 / 2 132 5-1 / 5 10-40 0.1-20 4.56 20 1080 127 5 145 5-7 / 10 10-40 0.1-20 5.04 20 1350 150 6 170 6-7 / 10 10-40 0.1-20 5.96 20 1440 200 8 220 10-4 / 5 10-40 0.1-20 7.95 20 1620

  • Drilling platform-lifting pipeline

    Abrasive powder for oil / powder supply system of offshore drilling platform filling station replenishment system, seawater drainage hose assembly and other pipelines used for jackup and semi-submersible drilling platforms, filling station replenishment system of drilling ships Material conveying hoses and other wear-resistant hose assemblies for industrial abrasive powder conveying applications, the hose body and hose joints must have a strong anti-pullout and sealing function, and the hose body must carry a variety of External forces, such as powder transportation, external wind and waves, etc. The hoses produced in the prior art have a large deformation rate (elongation, expansion) under working pressure and external pressure, and the hoses are in the process of powder transportation. The walls cause friction and collision, which is easy to generate static electricity and explode. The powder conveying hose assembly for the replenishment system of the offshore drilling platform filling station, including the hose and the joint connected to the hose. The hose includes the inner film, the skeleton material layer, and the outer rubber layer in order from the inside to the outside. The joint includes an inner core sleeve and a compression sleeve. The hose is inserted into the gap formed by the inner core sleeve and the compression sleeve. The hose is squeezed and compressed by squeezing the compression sleeve to prevent the connector from being pulled out. Function and form a sealing effect on the inner rubber. 1. The inner film uses butadiene rubber and natural rubber as the main materials, and sulfur and sulfenamide accelerators are added. Medium and ultra wear-resistant carbon black and high wear-resistant carbon black are used as reinforcement and conductive materials. 2. The skeleton material layer is Several layers of nylon cord or polyester cord. 3. The outer film uses CR neoprene and NR natural rubber as the main material, and medium super wear-resistant carbon black and high wear-resistant carbon black are added as reinforcing and conductive materials. 4. The inner rubber layer of the hose uses BR butadiene rubber and NR natural rubber as the main material, which is abrasion-resistant, aging-resistant, and conductive; the skeleton layer uses a tape layer with a small amount of deformation, while using a balance of 30 °-60 ° Angular winding, more preferably 54 ° 44 ', improve the situation of large deformation (elongation, expansion) under the working pressure of the hose; the outer film uses CR neoprene and NR natural rubber as the main material, and the outer rubber formula is conductive Performance, it is easy to generate static electricity when the powder is transported. The conductive function of the rubber material of the hose is easy to conduct static electricity to the metal joint on the end. The metal joint is connected to the equipment to conduct the static electricity. The surface resistance of the tube cannot exceed lO5Q / m, which meets the requirements of DNVNo. 9TAP5-791-70. The grounding resistance of each point of the hose cannot exceed 106Q, which meets the requirements of DNVNo. 9TAP5-791-70.

  • Offshore oil platform manifold, kill manifold, hydraulic brake manifold

    Drilling platform--high pressure control pipeline

    Scope of application: For drilling, cementing, workover and petroleum geological exploration, small drilling rigs and hydraulic coal mining operations, it is used as a flexible connector for mud manifolds, cementing manifolds, throttling well manifolds, etc. under high pressure Transport fluid media such as water, oil-based mud, cement slurry, well washing fluid and room temperature water. Temperature range: -30 ~ 82 ℃, also manufactured according to customer requirements. Product structure: Steel wire winding drilling hose consists of inner rubber layer, inner rubber protection layer, middle rubber layer, steel wire winding reinforcement layer and outer rubber layer. Adhesive layer in the tube: It is mainly made of nitrile rubber, which is resistant to oil, abrasion and acid and alkali. Reinforced layer of the pipe body: It adopts a single high-strength steel wire, and 2 to 8 layers of steel wire winding structure, and the steel wires are bonded together by a film to form a solid whole. Tube outer rubber layer: Mainly made of neoprene, oil-resistant, wear-resistant and weather-resistant. Connector type: In addition to API Spec 5B's line pipe and oil pipe thread, it can also be connected by flange and flange, and can also be manufactured according to user requirements. (Sectional view of high-pressure Yuni) Implementation standards: API Spec 7K, SY 5469, ISO 6807, Q / LMH001. I. Application: It is mainly used for the soft connection of the internal and external discharge nozzles, and the flexible connection between the mud gas separator and the throttle manifold. It not only has high pressure resistance, heat insulation, flame resistance, fire resistance, etc. Extremely high abrasion resistance. 2. Features: The joint adopts international integral vulcanization type, integral flange type and integral union type. The tube body has no resistance and has a long service life. Adapt to the soft connection of the discharge line inside and outside the well site and the soft connection of the throttle kill line. 1. Flexible throttling well manifold (pipeline) is suitable for the relative movement of drilling platforms, semi-submersible drilling vessels or drilling vessels, as well as the connection of parts that change the size of subsequent drilling rig installations, conveying oil, gas, mud and other high pressure Medium (mainly including the blowout line, the blowout line, and the throttling well line). 2. Implementation standards: API Spec 16C, SY / T 5323-2004. 3. The product has the characteristics of high pressure resistance, heat insulation, flame retardant, fire resistance, etc., and the inner wall is highly wear-resistant.

1 / 10pages Total 56 Records First Next End Jump To page