苹果版时时红包

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Construction Machinery Hose

    I. Product structure type: It is mainly composed of liquid-resistant inner rubber layer, middle rubber layer, 2 or 4 or 6 steel wire winding reinforcement layers, and outer rubber layer. The inner rubber layer has the ability to withstand the pressure of the conveying medium and protect the steel wire from erosion. The outer rubber layer protects the steel wire from damage, and the steel wire (φ0.3--2.0 reinforced steel wire) layer is the skeleton material for reinforcement. Product use: High-pressure steel wire reinforced hydraulic hoses are mainly used in mine hydraulic supports and oil field mining, and are suitable for engineering construction, lifting and transportation, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools, and various industrial sectors. Petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquids (such as emulsions, oil-water emulsions, Water) and other liquid transmission, the highest working pressure can reach 70-100MPa. Use medium and temperature, oil -30 degrees to 100 degrees, air -30 degrees to 80 degrees, water 0 degrees to 80 degrees, hydraulic power transmission or transportation of water, gas, oil and other high-pressure media to ensure the circulation and transmission of liquid Liquid energy. 3. All high-pressure hose assemblies produced by our company are made of high-quality steel wire braided hoses or steel wire wound hoses and hose joints, which are buckled by special equipment. According to the needs of users, high-quality carbon steel joints, stainless steel joints, copper joints, aluminum joints, etc. can be selected. The joint types and threads strictly refer to the national standard metric system (JB1891-1900-77) and the American standard (NPT-60 ° thread) British standard BSPT-55 ° thread), etc., with accurate data, reasonable structure, convenient assembly, tight buckle, high temperature, high pressure, and pulse working conditions, no liquid leakage, no head off, high safety factor, long service life, and according to user needs Design and produce special-shaped joints and connectors. Fourth, high-pressure heavy machinery glue] hose implementation standards: The hose executes the Q / (HG4) TJG1 standard, EN853 EN856 GB / T3683-2011 GB / T10544-2006 meets the requirements of the MT / T98 standard.

1 / 2pages Total10Article Home Next Last Go page