苹果版时时红包

Your current location : Home >> Products >> Mining Water Conservation Hose
  • Flange steel hose

    The large-diameter flange type steel wire rubber hose consists of an inner rubber layer, a middle rubber layer, a steel wire layer and an outer rubber layer. Product use: Large-caliber hose is suitable for conveying hydraulic fluids such as alcohol, hydraulic oil, fuel oil, lubricating oil, water, emulsion, hydrocarbons, etc. to achieve high-pressure fluid transmission or hydraulic power transmission. Working temperature: -40 ℃ — + 100 ℃ Inner rubber layer: synthetic rubber reinforced layer: cloth or thread braided reinforced skeleton layer: steel wire spiral outer rubber layer: wear-resistant, weather-resistant synthetic rubber outer tube: flat or uneven surface work Temperature: -20C ~ + 100C Product application: Handle petroleum products with aromatic hydrocarbon content up to 50%. Features: The hose has the dual performance of bearing positive or negative pressure, suitable for use in more complex conditions, and the burst pressure of the hose is not less than 3 times the working pressure. Application: Suitable for mining, agriculture, forestry, factories, civil engineering, etc. to attract or discharge water and general neutral liquids at room temperature. Uses: Suitable for attracting normal temperature water and general neutral liquids in industrial and mining, civil engineering and water conservancy projects. Features: The hose body has good flexibility, the body is strong, and has the dual performance of bearing positive and negative pressure. The hose still has good performance when used under the condition of withstanding a vacuum of 80kpa (600mm Hg). The burst pressure of the hose is not less than three times the working pressure. The inner diameter, outer diameter, working pressure and burst pressure of the suction and drainage hose can be customized according to customer requirements. The maximum caliber can reach 500 mm and the maximum length can reach 30 meters. Can be produced according to actual needs.

  • Large caliber suction hose

  • Sewage treatment hose

    1. Sewage treatment suction and suction hose structure: Large-diameter suction and discharge mud suction hose consists of thick wear-resistant rubber inner rubber layer, multi-layer cloth / cord winding reinforcement layer, spiral metal wire skeleton layer, middle rubber layer, wear-resistant and weather-resistant. Hou's outer rubber layer is composed. Inner rubber: Polyurethane and butyl rubber are the main raw materials, and special reinforcing agents are added. The finished inner rubber color is yellow and transparent, with high wear resistance, high toughness, and high pressure resistance. The wear resistance index is that of ordinary sandblasted hoses. 2-3 times. Reinforced layer: The cloth-blasted rubber hose uses high-quality rubberized cloth as the reinforced layer, which has good flexibility and strong pressure bearing capacity. 2. Use of large-diameter suction and drainage rubber hoses: Large-diameter suction and drainage rubber hoses are used for dredgers to suction and discharge mud and operate mortar. Pumping gasoline, kerosene, diesel, lubricants, and other mineral oils at room temperature can also be used for ports, docks, River dredging, urban drainage, etc. Suction and drainage at room temperature, mortar, water, carbon powder, concrete powder, mineral powder, drainage oil sludge, ash, sanitation pipe, suction pipe, gas drainage, and other materials. Acid and alkali (dilute) hose: Used to attract dilute acid and alkali solutions (except nitric acid) with a concentration of less than 10% at room temperature. 3. Large-caliber suction and discharge mud. Features: Mingda caliber suction and discharge mud. Layer, with high abrasion resistance, suction and discharge mud pipe body has the advantages of small outer diameter tolerance, excellent water resistance, soft and durable pipe body; small burst pressure of the hose can reach four times the working pressure. Suction and drainage rubber tubes are made of corresponding materials according to different working conditions. The product structure is reasonable, the quality is good, and the product is durable. 4. Technical parameters of large-diameter suction and discharge mud hose: (nominal inner diameter 38mm --- 800MM) inner diameter (mm) number of interlayers (layer) spiral wire diameter (mm) pipe joint length (mm) hose length working pressure is 0.5-2.0 MPa

  • Sewage treatment hose

    1. Sewage treatment suction and suction hose structure: Large-diameter suction and discharge mud suction hose consists of thick wear-resistant rubber inner rubber layer, multi-layer cloth / cord winding reinforcement layer, spiral metal wire skeleton layer, middle rubber layer, wear-resistant and weather-resistant. Hou's outer rubber layer is composed. Inner rubber: Polyurethane and butyl rubber are the main raw materials, and special reinforcing agents are added. The finished inner rubber color is yellow and transparent, with high wear resistance, high toughness, and high pressure resistance. The wear resistance index is that of ordinary sandblasted hose 2-3 times. Reinforced layer: The cloth-blasted rubber hose uses high-quality rubberized cloth as the reinforced layer, which has good flexibility and strong pressure bearing capacity. 2. Use of large-diameter suction and drainage rubber hoses: Large-diameter suction and drainage rubber hoses are used for dredgers to suction and discharge mud and operate mortar. Pumping gasoline, kerosene, diesel, lubricants and other mineral oils at room temperature can also be used for ports, docks, River dredging, urban drainage, etc. Suction and drainage at room temperature, mortar, water, carbon powder, concrete powder, mineral powder, drainage oil sludge, ash, sanitation pipe, suction pipe, gas drainage, and other materials. Acid and alkali (dilute) hose: Used to attract dilute acid and alkali solutions (except nitric acid) with a concentration of less than 10% at room temperature. 3. Large-caliber suction and discharge mud. Features: Mingda caliber suction and discharge mud hoses are made of special synthetic rubber. Layer, with high abrasion resistance, suction and discharge mud pipe body has the advantages of small outer diameter tolerance, excellent water resistance, soft and durable pipe body; the small burst pressure of the hose can reach four times the working pressure. Suction and drainage rubber tubes are made of corresponding materials according to different working conditions. The product structure is reasonable, the quality is good, and the product is durable. 4. Technical parameters of large-diameter suction and discharge mud hose: (nominal inner diameter 38mm --- 800MM) inner diameter (mm) number of interlayers (layer) spiral wire diameter (mm) pipe joint length (mm) hose length working pressure is 0.5-2.0 MPa

  • Sewage treatment hose

    1. Sewage treatment suction and suction hose structure: Large-diameter suction and discharge mud suction hose consists of thick wear-resistant rubber inner rubber layer, multi-layer cloth / cord winding reinforcement layer, spiral metal wire skeleton layer, middle rubber layer, wear-resistant and weather-resistant. Hou's outer rubber layer is composed. Inner rubber: Polyurethane and butyl rubber are the main raw materials, and special reinforcing agents are added. The finished inner rubber color is yellow and transparent, with high wear resistance, high toughness, and high pressure resistance. 2-3 times. Reinforced layer: The cloth-blasted rubber hose uses high-quality rubberized cloth as the reinforced layer, which has good flexibility and strong pressure bearing capacity. 2. Use of large-diameter suction and drainage rubber hoses: Large-diameter suction and drainage rubber hoses are used for dredgers to suction and discharge mud and operate mortar. Pumping gasoline, kerosene, diesel, lubricants and other mineral oils at room temperature can also be used for ports, docks, River dredging, urban drainage, etc. Suction and drainage at room temperature, mortar, water, carbon powder, concrete powder, mineral powder, drainage oil sludge, ash, sanitation pipe, suction pipe, gas drainage, and other materials. Acid and alkali (dilute) hose: Used to attract dilute acid and alkali solutions (except nitric acid) with a concentration of less than 10% at room temperature. 3. Large-caliber suction and discharge mud. Features: Mingda caliber suction and discharge mud hoses are made of special synthetic rubber. Layer, with high abrasion resistance, suction and discharge mud pipe body has the advantages of small outer diameter tolerance, excellent water resistance, soft and durable pipe body; small burst pressure of the hose can reach four times the working pressure. Suction and drainage rubber tubes are made of corresponding materials according to different working conditions. The product structure is reasonable, the quality is good, and the product is durable. 4. Technical parameters of large-diameter suction and discharge mud hose: (nominal inner diameter 38mm --- 800MM) inner diameter (mm) number of interlayers (layer) spiral wire diameter (mm) pipe joint length (mm) hose length working pressure is 0.5-2.0 MPa

  • Sewage treatment hose

    1. Sewage treatment suction and suction hose structure: Large-diameter suction and discharge mud suction hose consists of thick wear-resistant rubber inner rubber layer, multi-layer cloth / cord winding reinforcement layer, spiral metal wire skeleton layer, middle rubber layer, wear-resistant and weather-resistant. Hou's outer rubber layer is composed. Inner rubber: Polyurethane and butyl rubber are the main raw materials, and special reinforcing agents are added. The finished inner rubber color is yellow and transparent, with high wear resistance, high toughness, and high pressure resistance. The wear resistance index is that of ordinary sandblasted hose 2-3 times. Reinforced layer: The cloth-blasted rubber hose uses high-quality rubberized cloth as the reinforced layer, which has good flexibility and strong pressure bearing capacity. 2. Use of large-diameter suction and drainage rubber hoses: Large-diameter suction and drainage rubber hoses are used for dredgers to suction and discharge mud and operate mortar. Pumping gasoline, kerosene, diesel, lubricants, and other mineral oils at room temperature can also be used for ports, docks, River dredging, urban drainage, etc. Suction and drainage at room temperature, mortar, water, carbon powder, concrete powder, mineral powder, drainage oil sludge, ash, sanitation pipe, suction pipe, gas drainage, and other materials. Acid and alkali (dilute) hose: Used to attract dilute acid and alkali solutions (except nitric acid) with a concentration of less than 10% at room temperature. 3. Large-caliber suction and discharge mud. Features: Mingda caliber suction and discharge mud. Layer, with high abrasion resistance, suction and discharge mud pipe body has the advantages of small outer diameter tolerance, excellent water resistance, soft and durable pipe body; the small burst pressure of the hose can reach four times the working pressure. Suction and drainage rubber tubes are made of corresponding materials according to different working conditions. The product structure is reasonable, the quality is good, and the product is durable. 4. Technical parameters of large-diameter suction and discharge mud hose: (nominal inner diameter 38mm --- 800MM) inner diameter (mm) number of layers of cloth (layer) spiral wire diameter (mm) pipe joint length (mm) hose working pressure 0.5-2.0 MPa

1/6 pages Total 36 First Previous Next Last Go page