苹果版时时红包

Your current location : Home >> Products >> Construction Machinery Series
  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Breaker hydraulic line

    Hydraulic breaker is referred to as "breaker" or "crusher". The power source of the hydraulic breaker is the pressure provided by the excavator, loader or pumping station, which can more effectively break the stones and rocks in the construction, and improve Work efficiency. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the model of the excavator and the operating environment. The inner and outer layers of the high-pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) of cross-braided steel wire or wound steel wire. Poor quality hoses will appear: uneven wall thickness of the hose; too tight or too loose steel wire braiding or too few layers of steel wire; the amount of deformation (elongation, shortening or bending deformation) of the hose after compression is large; the outer layer of rubber Poor air-tightness results in corrosion of the steel wire; poor sealability of the inner layer of the glue allows high-pressure oil to easily enter the wire layer; insufficient adhesion between the glue layer and the wire layer. The above conditions will reduce the bearing capacity of the hose, and eventually burst in the weak part of the pipe wall. Hydraulic hose use: for various engineering buildings, including transportation, injection molding, agricultural machinery, metallurgy = forging, mining equipment, ships, machine tools, high-pressure liquid and hydraulic transmission in a variety of mechanized, automated systems. The hydraulic hose for futures tools is mainly used for various manual, electro-hydraulic jacks or similar tools as a source of pressure transmission. The applicable medium is hydraulic oil, fuel oil, lubricating oil, water, air and water-based liquids (castor (Except for sesame oil and fat-based liquid), medium temperature: oil -40 ℃ — + 100 ℃, air -30 ℃ — + 50 ℃, water emulsion + 80 ℃ or less. Hydraulic oil hoses for breakers for excavators. Models of breaker hoses are DN13 * 1.5 meters, breaker hoses, breakers, high pressure hoses, breaker hose assemblies, DN19 * 1.8 meters, breakers high pressure hose assembly plants, DN25 * 2.2 meters, breaker hoses. DN32 * 2.5 meters, a large amount of stock, crusher hose is resistant to high pressure and durable. The crusher high pressure hose assembly plant has a long life and complete models. Welcome to consult and order at any time! Breaker high pressure hose assembly

  • Withholding hose connector

    First, the full crimping high-pressure hose connector uses the latest nano-materials and selects high-quality steel from regular manufacturers. It is based on the standards of the original country, referring to the standards and structures of Germany, the United States, Japan, and other countries. The sealing form is carefully designed and manufactured; the hose assembly has excellent oil resistance, ozone resistance, aging resistance and high pulse performance; the pipe product has the characteristics of simple structure, convenient use, good interchangeability, and reliable performance. It is a hydraulic transmission Indispensable piping connection elements in technology. In addition, we can provide non-standard joints, hard pipe joints, hose joints, quick connectors and other high-quality products that meet the standards of GB, ISO, DIN and other standards; also cover products such as caps, springs and hydraulic seals. Second, the hose joint and hose buckle form: 1. Stripping the outer rubber buckle: the outer rubber layer of a certain length needs to be stripped: suitable for GB / T--3683-92, GB / T--10544-03, DIN20022, SAE100R1A / R2A and other standard steel wire braided hoses and steel wire wound hoses. 2. Non-peeling outer rubber buckle: simple processing technology, suitable for fiber braided hoses and steel wire braided hoses such as SAE100RIAT / R2AT. 3. Stripping the inner and outer rubber buckle: a certain length of inner rubber layer and outer rubber layer need to be peeled off, which is called an inner-lock safety buckle-type hose connector, which is suitable for GB / T10544-89 large-diameter pipe SAER12, DIN20023-4SH and other High pressure steel wire wound hose. 3. Hose joints and hose connection forms: 1. Fully crimped high-pressure hose joints. 2. Detachable hardcover joint. 3. Vulcanized joints and low-pressure fittings. 4. The connection with the pipeline is divided into: ABCDEFKMQWA.WB.WC.HD.HC and other forms of hose assembly, the length of the hose is not limited, as short as a few tenths to hundreds of meters.

1/6 pages Total 34 Records First Next Last Go page