苹果版时时红包

  • Steel skeleton hose

    Spiral steel wire hose with large openings Spiral steel wire hose is a rubber product. The main raw materials are natural rubber, recycled rubber, carbon black, styrene butadiene, etc. The color is black and there are steel wires entangled inside it, so it is called spiral steel wire hose. It can withstand the dual functions of positive pressure and negative pressure, so it is also known as steel wire suction pipe; because there is a steel wire skeleton entangled inside, the appearance looks corrugated, so it can be called a corrugated pipe. The large-diameter rubber hose consists of an inner rubber layer, a middle rubber layer, a steel wire layer, and an outer rubber layer. Product use: Large-caliber hose is suitable for conveying hydraulic fluids such as alcohol, hydraulic oil, fuel oil, lubricating oil, water, emulsion, hydrocarbons, etc. to achieve high-pressure fluid transmission or hydraulic power transmission. Working temperature: -40 ℃ — + 100 ℃ Inner rubber layer: synthetic rubber reinforced layer: cloth or thread braided reinforced skeleton layer: steel wire spiral outer rubber layer: wear-resistant, weather-resistant synthetic rubber outer tube: flat or uneven surface work Temperature: -20C ~ + 100C Product application: Handle petroleum products with aromatic hydrocarbon content up to 50%. Features: The hose has the dual performance of bearing positive or negative pressure, suitable for use in more complex conditions, and the burst pressure of the hose is not less than 3 times the working pressure. Application: It is suitable for mining, agriculture, forestry, factories, civil engineering, etc. to attract or discharge water and general neutral liquids at room temperature. Uses: suitable for attracting normal temperature water and general neutral liquids in industrial and mining, civil engineering and water conservancy projects. Features: The hose body has good flexibility, the body is strong, and has the dual performance of bearing positive and negative pressure. The hose still has good performance when used under the condition of withstanding a vacuum of 80kpa (600mm Hg). The burst pressure of the hose is not less than three times the working pressure. The inner diameter, outer diameter, working pressure and burst pressure of the suction and drainage hose can be customized according to customer requirements. The maximum caliber can reach 500 mm and the maximum length can reach 100 meters. Can be produced according to actual needs.

  • Steel skeleton hose

    Spiral steel wire hose with large openings Spiral steel wire hose is a rubber product. The main raw materials are natural rubber, recycled rubber, carbon black, styrene butadiene, etc. The color is black and there are steel wires entangled inside it, so it is called spiral steel wire hose. It can withstand the dual functions of positive pressure and negative pressure, so it is also known as steel wire suction pipe; because there is a steel wire skeleton entangled inside, the appearance looks corrugated, so it can be called a corrugated pipe. The large-diameter rubber hose consists of an inner rubber layer, a middle rubber layer, a steel wire layer, and an outer rubber layer. Product use: Large-caliber hose is suitable for conveying hydraulic fluids such as alcohol, hydraulic oil, fuel oil, lubricating oil, water, emulsion, hydrocarbons, etc. to achieve high-pressure fluid transmission or hydraulic power transmission. Working temperature: -40 ℃ — + 100 ℃ Inner rubber layer: synthetic rubber reinforced layer: cloth or thread braided reinforced skeleton layer: steel wire spiral outer rubber layer: wear-resistant, weather-resistant synthetic rubber outer tube: flat or uneven surface work Temperature: -20C ~ + 100C Product application: Handle petroleum products with aromatic hydrocarbon content up to 50%. Features: The hose has the dual performance of bearing positive or negative pressure, suitable for use in more complex conditions, and the burst pressure of the hose is not less than 3 times the working pressure. Application: It is suitable for mining, agriculture, forestry, factories, civil engineering, etc. to attract or discharge water and general neutral liquids at room temperature. Uses: suitable for attracting normal temperature water and general neutral liquids in industrial and mining, civil engineering and water conservancy projects. Features: The hose body has good flexibility, the body is strong, and has the dual performance of bearing positive and negative pressure. The hose still has good performance when used under the condition of withstanding a vacuum of 80kpa (600mm Hg). The burst pressure of the hose is not less than three times the working pressure. The inner diameter, outer diameter, working pressure and burst pressure of the suction and drainage hose can be customized according to customer requirements. The maximum caliber can reach 500 mm and the maximum length can reach 100 meters. Can be produced according to actual needs.

  • Steel skeleton hose

    Spiral steel wire hose with large openings Spiral steel wire hose is a rubber product. The main raw materials are natural rubber, recycled rubber, carbon black, styrene butadiene, etc. The color is black and there are steel wires entangled inside it, so it is called spiral steel wire hose. It can withstand the dual functions of positive pressure and negative pressure, so it is also known as steel wire suction pipe; because there is a steel wire skeleton entangled inside, the appearance looks corrugated, so it can be called a corrugated pipe. The large-diameter rubber hose consists of an inner rubber layer, a middle rubber layer, a steel wire layer, and an outer rubber layer. Product use: Large-caliber hose is suitable for conveying hydraulic fluids such as alcohol, hydraulic oil, fuel oil, lubricating oil, water, emulsion, hydrocarbons, etc. to achieve high-pressure fluid transmission or hydraulic power transmission. Working temperature: -40 ℃ — + 100 ℃ Inner rubber layer: synthetic rubber reinforced layer: cloth or thread braided reinforced skeleton layer: steel wire spiral outer rubber layer: wear-resistant, weather-resistant synthetic rubber outer tube: flat or uneven surface work Temperature: -20C ~ + 100C Product application: Handle petroleum products with aromatic hydrocarbon content up to 50%. Features: The hose has the dual performance of bearing positive or negative pressure, suitable for use in more complex conditions, and the burst pressure of the hose is not less than 3 times the working pressure. Application: It is suitable for mining, agriculture, forestry, factories, civil engineering, etc. to attract or discharge water and general neutral liquids at room temperature. Uses: suitable for attracting normal temperature water and general neutral liquids in industrial and mining, civil engineering and water conservancy projects. Features: The hose body has good flexibility, the body is strong, and has the dual performance of bearing positive and negative pressure. The hose still has good performance when used under the condition of withstanding a vacuum of 80kpa (600mm Hg). The burst pressure of the hose is not less than three times the working pressure. The inner diameter, outer diameter, working pressure and burst pressure of the suction and drainage hose can be customized according to customer requirements. The maximum caliber can reach 500 mm and the maximum length can reach 100 meters. Can be produced according to actual needs.

  • Steel skeleton hose

    Spiral steel wire hose with large openings Spiral steel wire hose is a rubber product. The main raw materials are natural rubber, recycled rubber, carbon black, styrene butadiene, etc. The color is black and there are steel wires entangled inside it, so it is called spiral steel wire hose. It can withstand the dual functions of positive pressure and negative pressure, so it is also known as steel wire suction pipe; because there is a steel wire skeleton entangled inside, the appearance looks corrugated, so it can be called a corrugated pipe. The large-diameter rubber hose consists of an inner rubber layer, a middle rubber layer, a steel wire layer, and an outer rubber layer. Product use: Large-caliber hose is suitable for conveying hydraulic fluids such as alcohol, hydraulic oil, fuel oil, lubricating oil, water, emulsion, hydrocarbons, etc. to achieve high-pressure fluid transmission or hydraulic power transmission. Working temperature: -40 ℃ — + 100 ℃ Inner rubber layer: synthetic rubber reinforced layer: cloth or thread braided reinforced skeleton layer: steel wire spiral outer rubber layer: wear-resistant, weather-resistant synthetic rubber outer tube: flat or uneven surface work Temperature: -20C ~ + 100C Product application: Handle petroleum products with aromatic hydrocarbon content up to 50%. Features: The hose has the dual performance of bearing positive or negative pressure, suitable for use in more complex conditions, and the burst pressure of the hose is not less than 3 times the working pressure. Application: It is suitable for mining, agriculture, forestry, factories, civil engineering, etc. to attract or discharge water and general neutral liquids at room temperature. Uses: suitable for attracting normal temperature water and general neutral liquids in industrial and mining, civil engineering and water conservancy projects. Features: The hose body has good flexibility, the body is strong, and has the dual performance of bearing positive and negative pressure. The hose still has good performance when used under the condition of withstanding a vacuum of 80kpa (600mm Hg). The burst pressure of the hose is not less than three times the working pressure. The inner diameter, outer diameter, working pressure and burst pressure of the suction and drainage hose can be customized according to customer requirements. The maximum caliber can reach 500 mm and the maximum length can reach 100 meters. Can be produced according to actual needs.

  • Steel skeleton hose

    Spiral steel wire hose with large openings Spiral steel wire hose is a rubber product. The main raw materials are natural rubber, recycled rubber, carbon black, styrene butadiene, etc. The color is black and there are steel wires entangled inside it, so it is called spiral steel wire hose. It can withstand the dual functions of positive pressure and negative pressure, so it is also known as steel wire suction pipe; because there is a steel wire skeleton entangled inside, the appearance looks corrugated, so it can be called a corrugated pipe. The large-diameter rubber hose consists of an inner rubber layer, a middle rubber layer, a steel wire layer, and an outer rubber layer. Product use: Large-caliber hose is suitable for conveying hydraulic fluids such as alcohol, hydraulic oil, fuel oil, lubricating oil, water, emulsion, hydrocarbons, etc. to achieve high-pressure fluid transmission or hydraulic power transmission. Working temperature: -40 ℃ — + 100 ℃ Inner rubber layer: synthetic rubber reinforced layer: cloth or thread braided reinforced skeleton layer: steel wire spiral outer rubber layer: wear-resistant, weather-resistant synthetic rubber outer tube: flat or uneven surface work Temperature: -20C ~ + 100C Product application: Handle petroleum products with aromatic hydrocarbon content up to 50%. Features: The hose has the dual performance of bearing positive or negative pressure, suitable for use in more complex conditions, and the burst pressure of the hose is not less than 3 times the working pressure. Application: It is suitable for mining, agriculture, forestry, factories, civil engineering, etc. to attract or discharge water and general neutral liquids at room temperature. Uses: suitable for attracting normal temperature water and general neutral liquids in industrial and mining, civil engineering and water conservancy projects. Features: The hose body has good flexibility, the body is strong, and has the dual performance of bearing positive and negative pressure. The hose still has good performance when used under the condition of withstanding a vacuum of 80kpa (600mm Hg). The burst pressure of the hose is not less than three times the working pressure. The inner diameter, outer diameter, working pressure and burst pressure of the suction and drainage hose can be customized according to customer requirements. The maximum caliber can reach 500 mm and the maximum length can reach 100 meters. Can be produced according to actual needs.

  • Steel skeleton hose

    1. Composition and characteristics: The tube wall is composed of an inner rubber layer, a fabric layer, a spiral metal steel wire layer, a middle rubber layer and an outer rubber layer. The tube body is strong and flexible, and the surface of the tube body is linen and linen. It is corrugated and spiral. 2. Classification and use: According to the different properties of the rubber layer, it can be divided into water-absorbing hoses, oil-absorbing pipes, wear-resistant hoses and acid-resistant alkali hoses. Inner diameter (mm) Number of interlayers (layer) Spiral wire diameter (mm) Pipe joint length (mm) Nominal size tolerance of hose length Dimension tolerance (m) Tolerance (mm) 38 1.2 2 3 2.0 75 10 10 150 51 1.2 3 4 2.6 100 15 10 150 64 1.5 3 4 2.6 100 15 10 150 76 1.5 4 5 2.6 100 15 10 150 89 1.5 4 5 3.2 100 15 10 150 102 2.0 4 5 3.2 125 20 10 150 127

1 / 2page Total 12 Records First Next Last Jump To page